Quotation |
| 110ML
110ml standard bottle sampler unit incorporates de-aeration facility. Suitable for mineral oil applications only. |
| 250ML
250ml laboratory bottle sampler unit incorporates de-aeration facility. See Ordering Information for part numbers for phosphate esters and mineral oil applications. |
View of a 110ml bottle sampler unit A simple selection of the correct switch will enable the user to choose between VACUUM and de-aeration or SAMPLE to carry out analysis of the bottle sample. |
|
 |
 |
| Air can be seen as contaminants An example of the difference between an aerated sample and non aerated sample can be seen below. |
 |
CERTIFICATE OF CLEANLINESS MP Filtri UK hereby confirms that the sample bottles provided, Part No: .P.02, have been cleaned in accordance with Class 0.
|
| < select buttons for further information |
| CLEAN BOTTLES [ From BFPA/P5 report on Sample Bottles Cleanliness] It is essential that only sample bottles which have been cleaned and verified by the ISO 3722 standard are used. Modern hydraulic systems featuring highly effective filters have fluid cleanliness levels that approach that of the sample bottles themselves.The use of uncleaned bottles can greatly increase the particle counts (see table below). Please note that sterilisation kills bacteria but does not remove particles. Perhaps of even greater concern is the variability in their levels; some may be reasonably clean and give a fair representation of the system's cleanliness, only to experience a sudden increase in contamination when unknowingly a dirty bottle is used. This apparent increase could instigate unnecessary corrective action. |
| Sample | Particle Counts per 100mL | ||||
>2 µm |
>5 µm |
> 15 µm |
> 25 µm |
> 50 µm |
|
| Bottles 250mL bottles cleaned to ISO 3772 As received (glass) As received (plastic) System Levels Servo controlled fatigue rig Plastic injection moulding machines Agricultural tractors (roll-off) cleanliness Rail car transmissions |
285 5,900 10,150 4,200 7,160 - 12.600 |
150 3,480 6,615 2,268 2,900 14,200 5,650 |
26 1,090 2,410 640 784 804 760 |
7 4 25 1,115 183 192 308 121 |
0 102 275 24 16 24 6 |
| Table : Cleanliness of sample bottles compared to system levels |
Sampling Methods |
ENG |
FRE |
Moisture Sensor |
Home |
 |
Bottle sampling options |
|
Accessories |
|
LPA2 Features + benefits |
|
PML2 Features + benefits |
|
Re-calibration |
|
Software |
|
Testimonials + Reviews |
|
LPA2 Ordering information |
|
PML2 Ordering information |
|
CML2 Ordering information |
|
Manuals + brochures |
|
Technical standards |
|
Technical information |
|
CONTACT > |
|
Exhibition dates |
|
Company Profile |
|